|
|
Determination of cholesterol, 7-dehydrocholesterol and cholecalciferol by HPLC with spectrophotometric and electrochemical detection
Dostálková, Lucie ; Schwarzová, Karolina (advisor) ; Vyskočil, Vlastimil (referee)
The aim of this thesis is to verify the possibility of simultaneous determination of three structurally related biologically active substances (cholesterol, 7-dehydrocholesterol and cholecalciferol) after previous separation by high-performance liquid chromatography followed by electrochemical (on a boron-doped diamond electrode) and spectrophotometric detection, which were compared in this work. The influence of the water content in the mobile phase (in the range of 0-10 %) on the retention factor of the analytes and their response for both types of detectors was investigated. Using all mentioted water contents, the analytes baseline-separated. As the water content increased, the retention factor of the analytes increased as well as the background current for higher positive detection potentials. Based on the recorded hydrodynamic voltammograms, the optimum detection potential + 1.8 V was chosen. The optimum wavelength for spectrophotometric detection was 200 nm. The concentration dependence was measured in an of 50 mmol l−1 sodium perchlorate in acetonitrile mixed with water (95:5, v/v). The spectrophotometric detector provided lower detection limits compared with the electrochemical detector, which had detection limits of 2.3 μmol l−1 for cholesterol, 1.4 μmol l−1 for 7-dehydrocholesterol and...
|
|
|
Determination of Heparin by Sequential Injectin Analysis with Spectrophotometric Detection
Lišková, Růžena ; Hraníček, Jakub (advisor) ; Nesměrák, Karel (referee)
In this work the determination of heparin using Sequential Injection Analysis (SIA) technique with spectrophotometric detection was studied. The principle of this method was measuring the decrease of absorbance of phenothiazine dyes in its maximum wavelength caused by its interaction with heparin. The decrease is proportional to concentration of heparin in sample. The aim of this work was to find optimum conditions for determination of heparin by the SIA with spectrophotometric detection and to try to apply this measurement to real sample under these conditions. Three phenothiazine dyes were used: Methylene Blue, Azure A and Azure B and for each of them an optimum concentration was found. Their values were for methylene blue 4.0 ∙ 10-5 mol/dm3 and 5.0 ∙ 10-5 mol/dm3 for Azure A and Azure B. 150 µl was chosen as an optimum amount of heparin and reagent aspirated. Optimum reaction time was 0 s and flow rate during measurement 1.5 ml/min. Working concentration range was found between 0.23 and 15 mg/dm3 for methylene blue, 1.2 and 13 mg/dm3 for Azure A and 0.67 and 12 mg/dm3 for Azure B. Limit of detection varied between 0.09 - 0.35 mg/dm3 and limit of quantification between 0.30 and 1.2 mg/dm3 for different dyes. Relative standard deviation was determined as a measure of repeatability. Its values were...
|
|
|
HPLC-ED/UV with Solid Phase Extraction for the Determination of 5-Hydroxyindole-3-acetic Acid
Němečková-Makrlíková, Anna ; Dejmková, H. ; Navrátil, Tomáš ; Barek, J. ; Vyskočil, V.
Determination of 5-HIAA in human urine was successfully performed using HPLC-ED/UV with SPE. HPLC-ED is a very sensitive technique, presented method does not need any sample pre-treatment apart from SPE procedure, which replaced filtration of samples of human urine to avoid problems with clogging a HPLC column. The found native\nconcentrations of 5-HIAA in human urine using HPLC-ED with SPE fully corresponds with published normal concentrations in urine (17.8 - 58.3 micromol l-1). The found native concentrations of 5-HIAA were 18.4 micromol L-1 (calculated from peak height). The presented method is fast and could be used for simple\nscreening of human urine, because HPLC-ED/UV allows simultaneous determination of 5-HIAA, HVA, and VMA as important tumour biomarkers.
|
|
|
Determination of Heparin by Sequential Injectin Analysis with Spectrophotometric Detection
Lišková, Růžena ; Hraníček, Jakub (advisor) ; Nesměrák, Karel (referee)
In this work the determination of heparin using Sequential Injection Analysis (SIA) technique with spectrophotometric detection was studied. The principle of this method was measuring the decrease of absorbance of phenothiazine dyes in its maximum wavelength caused by its interaction with heparin. The decrease is proportional to concentration of heparin in sample. The aim of this work was to find optimum conditions for determination of heparin by the SIA with spectrophotometric detection and to try to apply this measurement to real sample under these conditions. Three phenothiazine dyes were used: Methylene Blue, Azure A and Azure B and for each of them an optimum concentration was found. Their values were for methylene blue 4.0 ∙ 10-5 mol/dm3 and 5.0 ∙ 10-5 mol/dm3 for Azure A and Azure B. 150 µl was chosen as an optimum amount of heparin and reagent aspirated. Optimum reaction time was 0 s and flow rate during measurement 1.5 ml/min. Working concentration range was found between 0.23 and 15 mg/dm3 for methylene blue, 1.2 and 13 mg/dm3 for Azure A and 0.67 and 12 mg/dm3 for Azure B. Limit of detection varied between 0.09 - 0.35 mg/dm3 and limit of quantification between 0.30 and 1.2 mg/dm3 for different dyes. Relative standard deviation was determined as a measure of repeatability. Its values were...
|
|
|
Determination of heparine by SIA with spectrofluorimetric detection
Bár, Ladislav ; Rychlovský, Petr (advisor) ; Nesměrák, Karel (referee)
This thesis was focused on a determination of heparin using sequential injection analysis with spectrofluorimetric and spectrophotometric detection. The principle of determination was based on the interaction of heparin with phenothiazine dye. A decrease of fluorescence intensity of dye in its emission maximum was detected. In the case of spectrophotometric detection a decrease of the absorbance of dye was measured. Azure A, azure B and methylene blue were used as representantive selection of phenothiazine dyes. The determination was performed on a laboratory made SIA apparatus, for which a control software in LabVIEW 7.1 graphical programming was created. Two types of flow configuration for spectrofluorimetric detection were implemented. Type 1: For deionized water as a carrier stream with a injection of heparin and dye zones there were found the following optimal conditions: cdye = 1×10-5 mol dm-3 ; vflow = 2500 µl min-1 ; reaction coil length of 0 cm; injected volume of dye 150 µl and injected volume of sample 150 µl. Dynamic range of calibration curves with an exponential course for the individual dyes in the range of LOQ - 1200, eventually up 1500 IU dm-3 were detected. Limits of detection between 7.6 - 39.1 and the limits of quantification between 58.8 - 124.5 IU dm-3 were found. Type 2: For...
|
guest ::
